Fein ASse 636-2b Kinetik Manual Del Usuario página 12

ASse 636 -2b .book Seite 12 Donnerstag, 28. Juni 2001 8:55 08
EN
Environmental protection.
Packaging, worn out power tools and
accessories should be recycled.
Further information is available from your
dealer.
Specifications.
Order number
Type
Rated input
Output
On-load speed
No-load speed
max. tightening torque
for hard material
Weight
Tool receptacle
The A-weighted sound pressure level of
the power tool is typically 78 dB (A).
During operation of the power tool the
noise level may exceed 85 dB (A).
Wear ear protection!
The hand/arm vibration is typically less
2
than 2.5 m/s .
Measured values are determined accord-
ing to EN 50 144.
12
CE conformity.
We declare ourselves solely responsible
for this product conforming with the fol-
lowing standards or standardized docu-
ments: EN 50 144, EN 55 014,
EN 61 000-3-2/-3-3 in accordance with
the regulations in the recommendations
98/37/EC and 89/336/EEC.
7 210 77
ASse 636-2b
Kinetik
320 W
160 W
0 – 2100 rpm
0 – 3500 rpm
C. & E. FEIN GmbH & Co. KG,
Postfach 10 14 44 • 70013 Stuttgart
12 Nm
Any alterations made to the power tool
1.4 kg
shall render this declaration invalid and
7 mm with hinge
the guarantee shall become ineffective.
DIN 3126-H7
with internal flat
ASse 636 - 2b Kinetik
Bender Peltz