Applications; Delivery Contents; Device Description - Aventics PROFIBUS DP Instrucciones De Servicio

58 AVENTICS | PROFIBUS DP | R412009414-BDL-001-AE

Applications

3 Applications
The bus coupler is used to control valves via the PROFIBUS field
bus system.
The bus coupler is designed for use as a slave only on a
PROFIBUS DP bus system in accordance with EN 50170 Part 2.
4

Delivery contents

The following is included in the delivery contents:
W
1 valve system according to configuration and order
W
1 set of valve system operating instructions
W
1 set of bus coupler operating instructions
The valve system is individually configured. You can find the
exact configuration in the AVENTICS Internet configurator
under your order number.
5

Device description

The bus coupler makes it possible to control the VS via a
PROFIBUS field bus system. In addition to connections for data
lines and power supplies, the bus coupler also enables you to
set various parameters, and permits diagnosis via LEDs. A
detailed description of the bus coupler can be found in the
chapter "Device description" from page 58.
The following overview outlines the entire valve system and its
components. The VS itself is described in a separate operating
instructions.