Device Components; Bus Coupler - Aventics PROFIBUS DP Instrucciones De Servicio

60 AVENTICS | PROFIBUS DP | R412009414-BDL-001-AE
Device description
7
6
Fig. 2: Overview of the bus coupler
1 LED displays for diagnostic messages
2 Bus slave label
3 X71 (BUS IN) connection for the bus coupler to control the valves
4 X72 (BUS OUT) connection to control further PROFIBUS slaves
5 X10 (POWER) connection to supply the valve solenoids
6 Screw cap A 0.6 + 0.2 Nm: S1, S2 rotary switches (setting the station address) and S3 DIP
switch (setting modes)
7 Screw cap B 0.6 + 0.2 Nm: S4 sliding switch (valve assignment to power supply)
8 FE connection 4 + 0.5 Nm
9 Pocket for slide-in labels (see "Spare parts and accessories" on page 89)
1)
For plug assignment see page 64.
5.2

Device components

5.2.1

Bus coupler

9
8
9
1
2
1)
1)
3
4
5