Aventics PROFIBUS DP Instrucciones De Servicio página 81

AVENTICS | PROFIBUS DP | R412009414-BDL-001-AE
In the Herstellerspezifische Daten (Manufacturer-specific
data) area, you can change the 5 user parameter bytes.
In byte 0, the value may be changed from 0x00H to 04 Hex.
00 Hex means that the internal watchdog works with a time
basis of 10 ms. At 04 Hex it works with 1 ms. AVENTICS
recommends the 00 Hex setting.
Bytes 1, 2, 3, 4 must have value 00!
5. Enter the desired setting values.
The hardware configuration must then be transferred to the
controller. The controller checks whether the existing hardware
corresponds to the configuration.
Commissioning/Operation
81