Assembly; Assembling The Bus Coupler On The Valve System; Dimensions - Aventics PROFIBUS DP Instrucciones De Servicio

62 AVENTICS | PROFIBUS DP | R412009414-BDL-001-AE

Assembly

6 Assembly
6.1 Assembling the bus coupler
on the valve system
You will receive your individually configured HF03 LG or HF04
series valve system completely fitted with all components:
W
Valve terminal
W
Bus coupler
The operating instructions accompanying the VS describe in full
how to assemble the entire valve system. Any mounting
orientation may be used with the VS. The dimensions of the
complete VS vary according to module equipment (see Fig. 3).
6.1.1

Dimensions

33 9
Fig. 3: Dimensioned drawing of the valve system (bus coupler and
valves)
Dimensions A and B depend on the valve block used.
A + 33
B + 33