Tools Required - Danby DCR032A1BDB Manual Del Usuario

INSTALLATION INSTRUCTIONS
DOOR REVERSAL
INSTRUCTIONS
Before reversing the door swing, ensure the appliance is unplugged and empty. Provide additional support for the doors
while hinges are being removed. Do not depend on the door magnets to hold the door in place. It is recommended that
two people perform this task. DO NOT lay the appliance completely fl at as this may damage the coolant system.

TOOLS REQUIRED

• 10 mm socket screw driver
• Phillips style screw driver
Unscrew the two screws and one nut from
the bottom hinge. Remove the foot from op-
posite side.
Slide the appliance door downward and
move away from top hinge pin of the
appliance.
You should now have freed these pieces:
2 screws / nut / bottom bracket/ foot.
Remove the plastic cover from the door hinge
fi rst. Then unscrew the three screws from top
hinge and transfer them to the other side.
4