Nilfisk-Advance 7765 Serie Instrucciones De Uso página 29

GENERAL MACHINE MAINTENANCE
LUBRICATION OF STEERING RACK GUIDE
Make sure the steering system and surrounding components are cool to the touch before attempting to grease the steering system
lubrication fi ttings. Failure to observe this safety precaution can result in severe burns.
Grease the Rack (A), and the Lubrication Fittings (B & C) on the bottom
of the Rear Wheel Support (D) and on the Rack Guide (E) every 100 hours
of operation. Note that the Rear Wheel Support Lubrication Fitting (B) is
mounted on the bottom of the Rear Wheel Support (D). There is a Cutout (F) in
the frame to allow access to the Rack Guide Lubrication Fitting (C).
Service Note: To grease the Rack (A), turn the steering wheel all the way toward
the right. This will extend the Rack (A) toward the rear of the machine to allow
you to grease the teeth on the Rack (A).
D
revised 1/14
WARNING
B
C
E
A
B
C
FORM NO. - 56041801 - 7765 - A-29
ENGLISH / A-29
D
F