SAFETY INFORMATION (cont'd)
• Do not open the case while the test leads are connected to the
circuit or while the meter is on. Damage to the meter can result.
• Do not change the position of the selector switch when the test
leads are connected to a component or circuit. Damage to the
meter can result.
• Do not attempt to repair this test instrument. It contains no
user-serviceable parts.
• Do not expose meter to extremes in temperature or high humidity.
Damage to the meter can result. See Specifications section of this
manual.
Failure to observe these precautions may result in minor injury and/or
damage to this instrument.
• Use only properly rated fuses when replacement is necessary.
See the Specifications section of this manual.
• Replace weak or discharged batteries as soon as either of these
conditions is detected.
• This meter is not equipped with an EMI shield. Using this meter in
areas with high-frequency fields nearby may cause inaccurate
readings.
All manuals and user guides at all-guides.com
93-604 Multimeter
5