Snapper ESXDBL82 Manual De Utilización página 5

EN
AR BG CS DA DE ES ET FI FR HR HU IT LT LV NL NO PL PT RO RU SK SL SR SV TR UK
discharge chute, or near any moving part.
„ Inspect unit to ensure no foreign material/
debris is in the machine prior to operation.
„ Do not allow processed material to
build up in the discharge zone; this may
prevent proper discharge and can result
in kickback of material through the intake
opening.
„ If the machine becomes clogged, shut-
off the power source and disconnect the
machine from supply before cleaning
debris.
„ Never operate the machine with defective
guards or shields, or without safety
devices, for example debris collector in
place.
„ Keep the power source clean of debris
and other accumulations to prevent
damage to the power source or possible
fire.
„ Do not transport this machine while the
power source is running.
„ Do not tilt the machine while the power
source is running.
„ Always stand clear of the discharge zone
when operating this machine.
„ Stop the machine, and remove battery
pack. Make sure that all moving parts
have come to a complete stop
- whenever the machine is left by the
user,
- before checking, cleaning or working on
the machine,
- after striking a foreign object to inspect
the machine for damage,
- if the machine starts to vibrate
abnormally, for immediately check.
MAINTENANCE AND STORAGE
„ Keep all nuts, bolts and screws tight to
be sure the appliance is in safe working
condition.
„ Replace worn or damaged parts.
„ Use only genuine replacement parts and
accessories.
„ Store the machine in a dry place out of
the reach of children.
„ When the machine is stopped for
servicing, inspection, or storage, or to
change an accessory, shut off the power
English (original instructions)
source, disconnect the machine from the
supply and make sure that all moving
parts are come to a complete stop. Allow
the machine to cool before making any
inspections, adjustments, etc. Maintain
the machine with care and keep it clean.
„ Always allow the machine to cool before
storing.
„ Never attempt to override the interlocked
feature of the guard.
„ Store indoors, and do not expose to rain
or water, avoid direct sunshine.
Use only the manufacturer's replacement
parts. Failure to do so may cause poor
performance, possible injury and may void
your warranty.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
WORK AREA SAFETY
„ Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
„ Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
„ Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
ELECTRICAL SAFETY
„ Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if
your body is earthed or grounded.
„ Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
PERSONAL SAFETY
„ Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment
of inattention while operating power tools
2
WARNING