Guarantee Certificate - Arregui IDEAL 5 Guia De Inicio Rapido

BEWARE!
Read these instructions before
installing and using the safe.
You will obtain the I.D. number for the safe from its serial
number on the front of the door and on the cover of these
instructions, which you'll need to request emergency openings,
spare parts, etc...
1. OPENING AND CLOSING OF THE SAFE
To open the safe, place the key in the lock and give a half-turn
to the right (in a clockwise direction) Open the door
Note: Once the key remains turned in the opening position it
cannot be taken out.
To close the safe, shut the door and give the key a half-turn to
the left (in an anti- clockwise direction).
2. COPYING KEYS
The request for some duplicate keys should be made to your
reseller of confidence. In the case of loss or theft of the key,
we advise you the whole replacement of the lock which may
be requested mentioning the reference.
3. MAINTENANCE
Grease/oil any mechanical moving parts, such as locks and
bolts.
A5 instrucciones IDEAL 5 Y 10.indd 5

GUARANTEE CERTIFICATE

The safe is guaranteed for a period of 24 months from the date of
its purchase, as established by the Law 23/2003 dated July 10th on
Guarantees in the Sale of Consumer Goods.
ABSS accepts the responsibility for lacks of approval declared within
a period of two years in the event of any manufacturing fault which
affects the functioning of the safe from the date of its delivery,
according to the law. As from the first 12 months, the buyer must prove
that the non-conformity already existed at the moment he received the
safe.
The faults produced as a result of an improper use or installation, an
excess of humidity or salinity, water or cement filtrations, force, the
handling of the devices by non-authorized persons, disasters, impacts
and falls are excluded from the guarantee.
The repair or substitution of any part due to a fault implies a 6-month
extension to the guarantee of the part repaired or substituted. ABSS
will accept the responsibility for the non-conformities that caused this
repair when the same factory faults that caused the first repair are
repeated.
IDENTITY DETAILS
Name of the supplier ....................................................
Date of sale .... ............................................................
Name of purchaser ......................................................
Address of purchaser ...................................................
IDENTIFYING DETAILS OF THE SALE
Model...........................................................................
Series number .............................................................
IMPORTANT:
• These details must be completed as clearly as possible and without
delay by the supplier, who will stamp and sign on behalf of his com-
pany in the place indicated.
• The certificate remains in the possession of the purchaser.
• The purchaser must keep the RECEIPT for the purchase of the safe,
together with the GUARANTEE CERTIFICATE to be able to accredit
the date of purchase. Both documents are necessary to use the
guarantee.
SUPPLIER'S STAMP
En
22/4/20 11:40