Tabla de contenido
Publicidad
them away from the front;
2 8• release, from the back, the shoulder pads and pull them
away from the safety harness from the front;
2 9• slip the head rest off from the top;
3 0• unfasten, from underneath the frame, the buckle of the leg
divider strap (fig. a) and extract the strap from the pad of
the leg divider (fig. b);
3 1• pull the lining upwards to remove it, checking that the
strap goes through the opening.
Maintenance of the padding
Brush the fabric parts to remove dust.
• Machine wash at a maximum of 30°C with a delicate wash
setting and short spin cycle.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
Do not remove stains with solvents.
• Do not tumble dry.
°
30
How to replace the lining on the
Viaggio1 Duo-Fix ASIP car seat
To replace the lining of the Viaggio1 Duo-Fix ASIP car seat:
3 2• insert the safety harness from underneath the frame and
thread them through the openings at the base of the seat.
Insert the strap in the lining of the leg divider;
3 3• attach it to the opening in the frame
3 4• attach the strip to the attachment point of the leg divider
strap
3 5• thread the lining starting from the seat and moving
upwards, paying attention to the shape of the backrest.
3 6• Thread the head rest – make sure the red strip is passed
through the opening in the fabric.
• Thread the shoulder straps in the safety harness.
3 7• Insert the safety straps in the seat in this order: begin with
the buckle of the shoulder straps and then deal with the
straps.
3 8• extend the straps and insert them in the seat's frame (the
All manuals and user guides at all-guides.com
3 9• fasten them properly in the back, as shown in the picture.
• fasten the safety harness straps (point 17)
4 0• fasten them to the back attachment point, threading them
• apply the booster seat if the baby is still small.
4 1• The name of the product, production date and serial
4 2• The approval label of the Viaggio1 Duo-Fix ASIP is behind
4 3• Production date of the strap.
• This paragraph explains how to interpret the approval label
• The label is double because this car seat is approved for
• ISOFIX attachment systems (the term SEMI-UNIVERSAL
26
straps in the upper hole, the buckle in the lower one).
IMPORTANT: the straps must not be twisted around.
behind the instructions tray.
Serial numbers
number of the Viaggio1 Duo-Fix ASIP can be found under
the seat.
the backrest.
This information is required for any complaints.
Product cleaning
• This product requires a small amount of maintenance.
Cleaning and maintenance must only be carried out by adults.
• Keep all moving parts clean and if necessary lubricate
them with light oil.
• Clean the plastic parts periodically with a damp cloth. Do
not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device with
solvents or other similar products.
• Protect the product from atmospheric agents: humidity,
rain or snow. Extended exposure to sunshine can cause
colour changes in many materials.
• Store the product in a dry environment.
How to read the approval label
(orange label).
two types of installation in cars:
class A indicates compatibility of the car seat with vehicles
fitted with this system).
Publicidad
Tabla de contenido
