Serial Numbers; Product Cleaning - Peg-Perego Viaggio1 Duo-Fix Instrucciones De Uso

press the lever underneath (fig. a) and pull it towards you
into the required position (fig. b).
• To release the Viaggio1 Duo-Fix car seat from the Isofix Base
0+1, press the same lever in the same way (See Point 10).
How to remove the cover
To remove the cover of the Viaggio1 Duo-Fix car seat:
• Remove the booster cushion if it is present (See Point 1).
• Release the safety straps (See Point 14).
• Release the tabs of the straps from the shell at the back
(See Point 3 b).
 9• Release the shoulder strap padding from the safety straps.
3 0• Release the leg divider strap clip from under the shell (fig.
a) and pull the strap out from the leg divider (fig. b).
3 1• Remove the padding from above.
Maintenance of the padding
Brush the fabric parts to remove dust.
• Machine wash at a maximum of 30°C with a delicate wash
setting and short spin cycle.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
Do not remove stains with solvents.
• Do not tumble dry.
30 °
How to replace the cover on Viaggio1
Duo-Fix
To replace the cover of the Viaggio1 Duo-Fix car seat:
3 • Insert the straps in the slots on the sides of the cover base
from below.
3 3• Insert the strap in the leg divider.
3 4• Insert the leg divider strap clip in the hole in the shell.
3 5• Fasten the tab in the leg divider slot.
• Put the padding in place.
• Slip the shoulder strap padding onto the straps.
• Fasten the harness (See Point 17).
GRUPPO1_FI000903I104.indd 25
IMPORTANT: The straps must not be twisted.
• Insert the shoulder straps in the cover slots at the required
height (See Point 4).
3 6• Attach the straps to the clip on the back of the car seat.
• Finally, insert the shoulder strap padding slide buckles in
the shell at the required height (See Point 5).
• Fit the booster cushion if the child is still small.

Serial numbers

3 7• The name of the product, production date and serial
number of the Viaggio1 Duo-Fix can be found under the
seat.
3 8• The approval label of the Viaggio1 Duo-Fix is behind the
backrest.
3 9• Production date of the strap.
This information is required for any complaints.

Product cleaning

• This product requires a small amount of maintenance.
Cleaning and maintenance must only be carried out by adults.
• Keep all moving parts clean and if necessary lubricate
them with light oil.
• Clean the plastic parts periodically with a damp cloth. Do
not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device with
solvents or other similar products.
• Protect the product from atmospheric agents: humidity,
rain or snow. Extended exposure to sunshine can cause
colour changes in many materials.
• Store the product in a dry environment.
How to read the approval label
• This paragraph explains how to interpret the approval label
(orange label).
• The label is double because this car seat is approved for
two types of installation in cars:
• ISOFIX attachment systems (the term SEMI-UNIVERSAL
class A indicates compatibility of the car seat with vehicles
fitted with this system).
5
27-10-2009 10:46:25