BOSKA Cheese-O-Matic Manual Del Usuario página 3

EN
Use the counter hooks to fixate the Cheese-O-Matic® to your countertop. Follow these steps to
install the mounting hooks:
Attention! Place the counter hooks on the side
the handle is on.
1. Place the Cheese-O-Matic® upside down.
2. Place the clamp guide over the aluminium
profile and fasten it to the cutting board using the
supplied screws.
3. Repeat on the other side.
4. Place the clamp in the clamp guide. Leave the
turning knob somewhat loose.
5. Place the Cheese-O-Matic® on the countertop.
Slide the clamp up, until it reaches the bottom of
the counter. Then rotate the knob until fastened.