BOSKA Cheese-O-Matic Manual Del Usuario página 7

EN
• Now that the ball is lined up with the
opening, the ball can be pushed out by
pushing the wire up from below. Then pull
the whole wire through the rails.
• The new wire can be placed by pulling the
wire through the round opening. One the
ball is in position, the screwdriver can be
released.
• Lastly, the wire can be attached to the
handle as shown in step 1.
RKS Educational Product. For Instructional Use Only.
The conditions for warranty on professional cheese tools can be found on
www.en.boska.com/garantee
Warranty