Product Description; Parts Supplied; Recommended Use; Composition Of The Unit - CAMPAGNOLA Li-Ion 700 Manual De Uso Y Mantenimiento

The CE marking is unique and certifies the compliance of the product with the machinery directive and other
applicable directives according to the conditions prescribed and reported in this manual.
In the case of a "composite" machine / tool, a CE plate / label is attached to the product and a label in sticked on
the tool to identify the type of tool (eg. ATRA.xxxx) constituting the composite machine / tool
The customer is responsible for verifying the integrity of the CE plate / label.
The user is required to replace the CE plate and / or the warning plates which, due to wear, have become illegible.
It is absolutely forbidden to remove the plates / labels from the machine / tool. Campagnola S.r.l. declines all
responsibility for the safety of the machine / tool if this prohibition is neglected.
3.2

Product description

The power unit has been designed in order to power-supply some of the Manufacturer's electro-mechanical tools. The tool
compatibility with the battery has to be checked in the power-supply details inside the corresponding manuals.
The unit is based on a battery set (2), a back-pack (3) and a connecting cable (1).
The power-supply unit is fitted with batteries with Lithium cells (2). An electronic card in the battery checks the charging and
discharging steps to improve performance and quality.
The battery is inside a box (picture A) and is hooked to a backpack (3) which is fitted with braces and worn by the operator.
The best performance in terms of battery autonomy is reached after a few recharging cycles.
3.3

Parts supplied

Use and maintenance manual.
Battery-charger with its own Use & Maintenance Manual.
3.4

Recommended use

The unit was designed for pruning according to the manners and limits previously described.
• Any other use has to be considered improper and potentially dangerous for the operators' safety. This would
make any warranty claims void.
• If it is not used for the purposes it was designed for, the unit may cause serious injuries to personnel and
bystanders and damages to equipment and things.
3.5

Composition of the unit

Pos. Description
1
Power supply cable
2 Battery
3 Backpack
4 ON/OFF button
5 Charge connector
6 Cable connector
7
Battery display
8 ON/OFF Led light
9 Fixing slots
10 Fixing supports
3.6

Technical details

Technical details
Battery weight
Battery voltage
Battery
Average battery charge time
Battery endurance
Automatic electronic battery charger model
(*) This detail depends on the kind of use, of tree and of connected tool.
Use and maintenance manual – Translation of
original Instruction Rev.: 02, Data 08/11/2021
Function
Connects the power unit with the battery
Power supply the tool
Allows to carry the battery
Turns the battery on and off
Allows to charge the battery
Connects the cable to the battery
Allows to check the charge level
Shows if the battery is on or off
Allow to fix the battery to the backpack
Allow to fix the battery to the backpack
Li-Ion 700
3.7 Kg
50.4 V
Lithium ion
8-9 hours
8 hours (*)
SBC1402A (14S)
Pict.
B
A
B
A
B
A
A
A
C
A
Pag. 19