Operation / Cleaning and Maintenance / Disposal
Inserting photos
You can insert your own photographs into the clock's photo-holder
To do this, proceed as shown in Fig. B.
Reset the functions (RESET)
If the wall clock does not react, you can press the RESET button
to reset all the settings back to the default values. You can then
start again from the beginning.
Cleaning and Maintenance
Under no circumstances should you use liquids or detergents, as
these will damage the device.
The device should only be cleaned on the outside with a soft dry
cloth.
If the wall clock is not going to be used, remove the battery.
Disposal
Contact your local refuse disposal authority for more details of how to
dispose of your worn-out product.
38 GB/MT
63991_aur_Wanduhr_Content_LB5.indd 38
The packaging is made entirely of recyclable materials,
which you may dispose of at local recycling facilities.
.
8
2
26.07.11 09:05