Tabla de contenido
Publicidad
5. Carefully mark the position of buttonhole on your garment.
6. Place the fabric under the foot. Pull out the bobbin thread
underneath the fabric to a length of about 4 inches to the
rear.
7. Align the buttonhole mark on the fabric with the mark on
the buttonhole foot, and then lower the buttonhole foot.
8. While holding the top thread, start the machine.
* Sewing will be completed automatically in the following order.
Fabric marking
Marque du tissu
Marca de material
9. When sewing is finished, use a buttonhole opener to open
up the fabric in the center of the buttonhole. Be careful not
to cut the ends of the buttonhole.
64
1
2
3
Fabric marking
Mark
Marque du tissu
Marque
Marca de material
Marca
4
5
6
Buttonhole foot alignment position
Position d'alignement du pied boutonnière
Posición de alineación del pie de ojaladora
7
8
Publicidad
Tabla de contenido
