Dometic GROUP Waeco CoolAir RT880 Instrucciones De Uso página 35

RT880/SP950
7.5 Extracting condensation (SP950 only)
The condensated water which accumulates due to the way the system works
is automatically extracted at intervals during operation.
You can pump out the condensated water manually when necessary:
➤ Switch off the system.
➤ Press and hold the Operating mode (fig. 2 4, page 3) and – (fig. 2 7,
page 3) buttons simultaneously.
➤ In addition, press the ON/OFF button (fig. 2 1, page 3) briefly.
✓ The firmware version appears in the digital display for 5 seconds.
✓ 000 then appears in the digital display and the system starts the extraction
process for 15 seconds.
You can now let go of the Operating mode (fig. 2 4, page 3) and –
(fig. 2 7, page 3) buttons.
✓ The compressor and the fan do not switch on.
✓ The system switches off automatically.
NOTE
I
To stop the extraction early press the ON/OFF button until the
pump switches off.
If you want to tilt the driver's cab, you first need to drain the condensation
manually.
➤ Keep repeating this procedure until the pump starts making a clearly au-
dible, loud noise while draining.
✓ There is then no more condensation left in the system.
➤ Press the ON/OFF button until the pump switches off.
NOTICE!
A
Avoid prolonged dry periods as this can damage the pump
(indicated by loud noise while draining).
EN
All manuals and user guides at all-guides.com
Using the stationary air conditioner
35