eufy Security EufyCam 2C PRO Guia De Inicio Rapido página 8

The adapter shall be installed near the
equipment and shall be easily accessible.
Do not use the Device in the environment at
too high or too low temperature, never
expose the Device under strong sunshine or
too wet environment.
The suitable temperature for HomeBase 2
and accessories is -10°C-45°C.
The suitable temperature for eufyCam 2C Pro
and accessories is -20°C-50°C.
When charging, please place the device in an
environment that has a normal room
temperature and good ventilation.
It is recommended to charge the device in an
environment with a temperature that ranges
from 5°C~25°C.
Please ensure to use only the charger offered
by the manufacturer. Using unauthorized
charger may cause danger and violate the
authorization of the device and the guarantee
article.
This charger is for indoor use only.
The charger type is ASSA67W-120200/KA
2401A-1202000DE, output voltage/current
is 12Vdc/2A. The plug
considered as disconnect device of adapter.
RF exposure information: The Maximum
Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm
between the device and the human body.
To maintain compliance with RF exposure
requirement, use product that maintain
a 20cm distance between the device and
human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
Wi-Fi Operating Frequency Range:
2412~2472MHz; Wi-Fi Max Output Power:
17.13 dBm (ERIP for T8010X), 17.9 dBm (ERIP
for T8142X)
SUB-1G Frequency range: 866~866.8MHz;
SUB-1G Output Power: 5.492 dBm (ERIP for
12 EN
T8010X)
The following importer is the responsible
party (contact for EU matters only)
Anker Innovations Deutschland GmbH I
Georg-Muche-Strasse 3, 80807 Munich,
Germany
This product is designed and
manufactured with high quality materials
and components, which can be recycled
and reused.
This symbol means the product must not
be discarded as household waste, and
should be delivered to an appropriate
collection facility for recycling. Proper
disposal and recycling helps protect
natural resources, human health and the
environment. For more information on
disposal and recycling of this product,
contact your local municipality, disposal
service, or the shop where you bought
this product.
IC Statement
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference,
and
(2) this device must accept any interference,
including interference that may cause
undesired operation of the device. "
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage,
et
(2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre
le fonctionnement. "
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure compliance with
RF exposure requirements.
Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous
conformer aux exigences en matière d'exposition RF.
This product complies with the radio interference requirements of the United Kingdom.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type T8861 is in compliance with
Radio Equipment Regulations 2017. The full text of the UK declaration of conformity is available
at the following internet address: https:/ /uk.eufylife.com
Anker Technology (UK) Ltd I Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11
2AA, United Kingdom
EN 13