Security; Software Updates Over The Air; Software Update Settings; Request A Software Update - Nokia 6300b Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

S e t t i n g s

Security

When security features that restrict calls are in use (such as call restrictions, closed user group, and fixed dialing), calls may be
possible to the official emergency number programmed into your device.
Select
Menu
Settings
>
PIN code request
and
switched on. Some SIM cards do not allow the code request to be turned off.
PIN2 code request
— to select whether the PIN2 code is required when using a specific device feature which is protected
by the PIN2 code. Some SIM cards do not allow the code request to be turned off.
Call restrictions
— to restrict incoming calls to and outgoing calls from your device (network service). A restriction password
is required.
Fixed dialing
— to restrict your outgoing calls to selected phone numbers if this function is supported by your SIM card.
When the fixed dialing is on, GPRS connections are not possible except while sending text messages over a GPRS connection.
In this case, the recipient's phone number and the message center number must be included in the fixed dialing list.
Closed user group
— to specify a group of people whom you can call and who can call you (network service)
Security level
— Select
device. If you select Memory, the device asks for the security code when the SIM card memory is selected, and you want to
change the memory in use.
Access codes
— to change the security code, PIN code, UPIN code, PIN2 code, or restriction password
— to select whether the PIN code or UPIN code should be active
Code in use
Authority certificates
device.
See "Certificates," p. 34.
Security module sett.
signing PIN.
See "Access codes," p. 7.

Software updates over the air

Warning: If you install a software update, you cannot use the device, even to make emergency calls, until the
installation is completed and the device is restarted. Be sure to back up data before accepting installation of an update.
Your service provider may send device software updates over the air directly to your device (network service). This option may
not be available, depending on your device.

Software update settings

To allow or disallow software updates, select
updates
and the following options:
Always allow
— to perform all software downloads and updates automatically
Always reject
— to reject all software updates
Confirm first
— to perform software downloads and updates only after your confirmation (default setting)

Request a software update

Select
Menu
Settings
>
Current softw. details
to display the current software version and check whether an update is needed. Select
softw.
to download and install a software update. Follow the instructions on the display.

Install a software update

If the installation was canceled after the download, select
The software update may take several minutes. If there are problems with the installation, contact your service provider.

Restore factory settings

To reset some of the menu settings to their original values, select
code.
The names and phone numbers saved in
© 2007 Nokia. All rights reserved.
Security
and from the following options:
>
UPIN code request
— to set the device to ask for your PIN or UPIN code every time the device is
Phone
to set the device to ask for the security code whenever a new SIM card is inserted into the
or
User certificates
— to view the list of the authority or user certificates downloaded into your
— to view
Secur. module
Menu
Phone
Phone updates
>
>
Contacts
details, activate
Module PIN
Settings
Configuration
>
>
to request available software updates from your service provider. Select
Install softw. update
Menu
>
are not deleted.
25
request, or change the module PIN and
Device manager sett.
>
to start the installation.
Settings
Rest. factory
>
Serv. softw.
>
Downl. phone
sett.. Enter the security

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido