Tabla de contenido
Publicidad
NOTE: To reduce the risk of electrical shock, this vacuum has a polarized plug, one
blade is wider than the other. This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper outlet. DO NOT CHANGE THE PLUG IN
ANY WAY. Only use outlets near the floor.
TO OPERATE CLEANER
Cord Rewind Button
Bouton de rappel
du cordon
Almacenamiento del
cordon eléctrico
Press Here
Appuyer ici
Apriete aquí
On-Off Switch
On-Off Switch
Interrupteur de marche/arrêt
Control On-Off
Power Cord
➢ ➢ Pull cord out of canister to desired
length.
➢ ➢ Snap cord into cord clip to prevent
accidental rewinding.
➢ ➢ Plug cord into 120-volt outlet located
near the floor.
TO REWIND:
➢ ➢ Remove the cord from the cord clip.
Unplug the cleaner.
➢ ➢ Hold the plug while rewinding to
prevent damage or injury from the
moving cord.
➢ ➢ Push cord rewind button on the front
edge as shown.
➢ ➢ The cord will not rewind until the cord
rewind button is pushed.
➢ ➢ Press "On/Off" switch to start canister
and POWER NOZZLE.
- 20 -
Publicidad
Tabla de contenido
