Zeegma Zonder Klaar Manual De Usuario página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
holes of the floor brush are locked and the device does not
EN
suck air, please switch the product off and unplug. Only then
can you remove all obstacles. When the cleaning procedure
is over, put the storage battery back and turn the device on.
After every cleaning, make sure the brush, filters and dust
ҋ
bin have been properly mounted.
Use filters and parts supplied or recommended by the
ҋ
manufacturer. Use of filters and parts which have not
been recommended by the manufacturer may violate the
manufacturer's guarantee.
Do not use the device without supplied tips, dust bin and filters.
ҋ
Before you mount and use the device, make sure all filters
ҋ
have been properly dried.
Do not immerse the device and turbo brush in water or
ҋ
other liquids.
If the device acts up, has been dropped, damaged, left out of
ҋ
home, contact the manufacturer's authorized service center.
Do not touch the charger or equipment if your hands are wet.
ҋ
When you are assembling or disassembling the floor brush,
ҋ
the device must be off and unplugged.
To charge the storage battery, use only the power adapter
ҋ
supplied together with this device.
Do not use the device to vacuum hard or sharp items (such
ҋ
as broken glass, nails, pins, screws, coins and similar).
Do not use the device to vacuum smoking or burning pieces
ҋ
(such as matchsticks, butt ends, hot ash), micro-dust (such
as lime, cement, wood pieces, plaster).
Do not use the device to vacuum liquids, particularly
ҋ
inflammable fluids (such as petrol, petroleum oil or lighter
fuel), and chemicals (such as acids, detergents).
Do not use the device if any of the components gets hot,
ҋ
emits abnormal sounds or odors.
The product complies with requirements of EU directives.
Pursuant to the Directive 2012/19/EU, this product is subject to selective
collection. The product must not be disposed of together with domestic

Publicidad

Tabla de contenido
loading

Tabla de contenido