General Information - WIKA TFS135 Manual De Instrucciones

1. General information

1. General information
The bimetal temperature switch described in the operating
■
EN
instructions has been designed and manufactured using state-of-
the-art technology. All components are subject to stringent quality
and environmental criteria during production. Our management
systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on
■
handling the instrument. Working safely requires that all safety
instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and
■
general safety regulations for the instrument's range of use.
The operating instructions are part of the product and must be kept
■
in the immediate vicinity of the instrument and readily accessible to
skilled personnel at any time.
Skilled personnel must have carefully read and understood the
■
operating instructions prior to beginning any work.
The manufacturer's liability is void in the case of any damage
■
caused by using the product contrary to its intended use,
non-compliance with these operating instructions, assignment
of insufficiently qualified skilled personnel or unauthorised
modifications to the instrument.
The general terms and conditions contained in the sales
■
documentation shall apply.
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Relevant data sheet:
- Application consultant:
4
All manuals and user guides at all-guides.com
www.wika.de / www.wika.com
TV 35.02
Tel.: +49 9372 132-0
Fax: +49 9372 132-406
info@wika.com
WIKA operating instructions model TFS135