Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY RULES
•
Do not direct the air blow gun or compressed air stream to persons, animals or the body of your
own.
•
Always wear protective goggles to prevent the ingress of dust particles into the eyes.
•
Do not exceed the working pressure of 2-6 bar.
•
While connecting the air tool to the compressor's hose, don't forget to turn off the air flow.
CONNECTING
Make sure that the compressed air supply to the air blow gun is pressure-less.
Fig. 1
1. Make sure that pressure adjustment knob A is turned fully in an counterclockwise direction, thus
shutting off the air supply before starting the compressor.
2. Connect the nipple C of air hose to compressed air outlet coupling B (fig.1). Push nipple B firmly
inside the outlet coupling B.
3. Connect the nipple D of air blow gun to the coupling E of the other end of hose (fig.2).
4. Switch on the compressor only after all compressed air couplings have been checked for
tightness.
5. When you have finished working, close the compressed air outlet by fully rotating pressure
regulation knob A in a counterclockwise direction and actuating the air blow gun, to make sure
that the system is pressure-less.
MAINTENANCE, TRANSPORT & STORAGE
•
Regularly clear the tool of a dust and the rests of liquids. Do not use solvents, flammable or toxic
liquids to clean the gun.
•
After use, always store the air blow gun in a dry, clean environment.
SW-Stahl und Werkzeugvertriebs GmbH
5
d i e
3-piece Air Blow Gun Set
A
B
C
6
e
s
s
a r t S
h
c
s
m
e
R
D
Fig. 2
E
Tel. +49 (0) 2191 / 46438-0
r e
F
ax +49 (0) 2191 / 46438-40
s
u
k r e
v
e
7
9
8
2
4 -
D
e
3294
L
d . l h
a t s
w
s
@
o f n i
: l i
Publicidad
