Hisense WFHV6012EM Manual Del Usuario página 21

Displayed on Display Window
"F01"
"F03"
"F04", "F05", "F06", "F07" "F23" and "F02/F24"
"F13"
"F14"
"Unb"
a. "F01" displayed on screen
The machine is not fed with water or insufficient water. Check:
• Faucet is fully open and has enough water pressure.
• Water inlet pipe is knotted or not.
• Filtering net of water inlet pipe is blocked or not (refer to maintenance and
repair).
• Water pipe is frozen or not.
Press "Start/Pause" key after fault is removed.
If fault occurs again, please contact with after-sale service (refer to after-sale
service.).
b. "F03" displayed on screen
The washer is not emptied. The washer stops the program being executed. Shut
down the machine and disconnect power supply. Check:
• Drain pipe is knotted or not.
• Filter in drain pump is blocked or not (refer to the cleaning of filter in drain pump)
Ensure that
R
Fault Code List
Fault Description
Water inflow fault
Drainage fault
Electronic module fault, overflow or too much foam.
Door lock fault
Door unlock fault
Unbalance alarm
17