Before Each Start-Up; How To Start - Craftsman 919.184190 Manual Del Propietário

All manuals and user guides at all-guides.com
8. After 20 minutes, close the globe
valve.The air tank will fill to "cut-
out" pressure and the motor will
stop.

Before Each Start-Up:

1. Place On/Auto/Off lever to
"OFF".
2. Close the globe valve.
3. Attach hose and accessories.
NOTE: A regulator MUST be
installed when using accessories
rated at less than 120 PSI.
Too much air
pressure causes a
hazardous risk of the air tank
bursting. Check the manufacturer's
maximum pressure rating for air
tools and accessories. The
regulator outlet pressure must
never exceed the maximum
pressure rating.
D24917

How to Start

1. Turn the On/Auto/Off lever to
"AUTO" and allow air tank
pressure to build. Motor will
stop when air tank pressure
reaches "cut-out" pressure.
2. When the air tank pressure
reaches "cut-out" pressure open
the globe valve.
IMPORTANT: When using regulator
and other accessories refer to the
manufacturer's instructions.
NOTE: Always operate the air
compressor in well-ventilated areas
free of gasoline or other combustible
vapors. If the compressor is being
used to operate a sprayer, DO NOT
place compressor near the spray
area.
16- ENG