Section Vii.care Of Your Machine; Replacing The Light Bulb; Cleaning The Feed Dogs - Sears Kenmore 385.15202 Manual De Instrucciones

SECTION VIi.CARE OF YOUR MACHINE
NOTE:
* Unplug the machine_
* Do not dismantle the machine other than as explained
in this section°
* Do not store the machine in a high-humidity area, near
a heat radiator or in direct sunlight.
* Clean the outside of the machine with a soft cloth and
mild soap.
Replacing the Light Bulb
CAUTION:
As the light bulb could b e HOT, protect your fingers when
you handle it.
Unplug the machine and open the face covert While
pushing the bufb up, turn it to the left (counterclockwise) to
remove.. Put in a new bulb by pushing it up and turning it to
the right (clockwise)..
i =
¢
U,
t N
t i
Cleaning the Feed Dogs
Unplug the machine, and remove the presser foot and
needle. Open the face cover to allow room to remove the
needle plate screw with a screwdriver..
Use a lint brush to clean the feed dogs.
NOTE: I
Lint brush is not furnished with model 15202, but may be
ordered (page 4)
\
J
Replace the needle plate and tighten it with a screwdriver..
J
58