Removing Plain End Blades
WARNING
: To reduce the risk of
injury from accidental starting,
always turn switch "OFF" and
unplug power cord from outlet
before removing or replacing the
blade.
• Loosen tension on blade by turning ten-
sion knob counterclockwise
least three full turns.
• Loosen the upper blade holder by turn-
ing the knob on the holder counterclock-
wise
so the jaws open.
• Remove blade from upper blade holder.
• Loosen the lower blade holder knob in
the same way as the upper blade holder.
To make lower blade holder access eas-
ier, tilt the table to 45° and raise the
arms to the up position using a screw-
driver to rotate the motor shaft.
• Remove blade from lower blade holder.
Loosen
at
Loosen
Lower Blade
Holder
15
Upper
Blade
Holder
Loosen