SNOWJOE iON100V-24SB-CT Manual Del Usuario página 11

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE: If the green light is off while the red light flashes slowly,
this indicates a temperature abnormality (i.e. that the battery
pack is too hot). If the green light is off while the red light
flashes rapidly, this indicates there's something wrong with the
charger or the battery. Wait for a while and try to reinsert the
battery into the charger. If the situation still persists, contact
Snow Joe
+ Sun Joe
customer service at 1-866-SNOWJOE
®
®
(1-866-766-9563).
Temperature abnormal
(slowly flashing red)
5. A fully discharged iON100V-5AMP battery pack with an
internal temperature in the normal range will fully charge
in 1 hour 40 minutes (between 32ºF/0ºC and 104ºF/40ºC).
Heavily discharged battery packs may take longer to
charge completely.
6. When charging is complete, remove the battery from the
charger by pulling the battery backward to unlock it from
the charger (Fig. 7).
Fig. 7
7. Repeat the above operations to charge the other battery.
8. Timely recharging of the batteries will help prolong the
batteries' life. You must recharge the battery packs when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery packs to become
fully discharged as this will cause irreversible damage to
the batteries.
Charger Light Indicator Table
Use the table below to determine charger light patterns and
possible causes. For all other issues, contact Snow Joe
Sun Joe
customer service center at 1-866-SNOWJOE
®
(1-866-766-9563).
Something is wrong
(rapidly flashing red)
+
®
Indication
• Red Light – Steady
• Green Light – Off
• Red Light – Off
• Green Light – Slowly
flashes
• Red Light – Off
• Green Light – Steady
• Red Light – Off
• Green Light – Rapidly
flashes
• Red Light – Slowly
flashes
• Green Light – Off
• Red Light – Rapidly
flashes
• Green Light – Off
Assembly
m
WARNING!
To avoid serious personal injury, read and
understand all safety instructions provided.
m
WARNING!
Unpacking and assembly should be
completed on a flat and stable surface, with adequate space
for moving the machine and its packaging.
Tools and supplies required:
• Open end wrench (included)
• Tire gauge
11
Possible Cause
(Solution)
• No load charging –
There's no battery inserted
in the charger.
• Normal charging – The
battery is being charged.
• Fully charged – The battery
is fully charged and the
charging process is finished.
• Discharged – The battery is
heavily discharged. It may
take longer time for charging.
• Temperature abnormal –
Charging process will start
when battery returns to
normal temperature.
• Over current charging –
The current coming through
the charger is greater
than what the charger can
support. Stop charging as
soon as possible.
• Abnormal performance
– Something is wrong with
the battery or the charger.
Contact Snow Joe
+
®
Sun Joe
customer service
®
at 1-866-SNOWJOE
(1-866-766-9563).

Publicidad

Tabla de contenido
loading

Tabla de contenido