Krups EA9000 Serie Manual De Instrucciones página 17

Your machine has two drip trays (6 and 7).
The small drip tray collects drips from the coffee nozzles but can be removed for preparations with
n
tall glasses.
The large drip tray collects used water and overflows from the small drip tray.
n
The large drip tray is fitted with an overflow detection sensor.
n
When it needs to be emptied, the request will be made on the screen.
n
The cover of this tray is necessary to avoid excessive condensation and water spills.
n
!
Caution: The cover and the grid can fall when you empty the drip tray.
If the tray is dirty, clean it under running water. If the metal contacts are dirty, clean by scrubbing
n
them under water. Wipe the metal contacts dry before putting them back in the machine.
The drip trays will be separated when you empty them. Avoid spilling water as much as possible on
n
the metal contacts located at the end of the drip tray.
If the machine asks you to empty the drip tray when it is empty, check whether the metal contacts
n
at the back of the drip tray are clean and thoroughly dry.
n
Adjusting the coffee nozzle height
n
If using a mug: Caffe latte glass* without the small drip tray
All manuals and user guides at all-guides.com
Your machine is supplied with two cups only which can be used
ENGLISH
* Caffe latte glass not supplied
for cappuccino or a caffe latte.
15