Automatic Cleaning Programs - Krups EA9000 Serie Manual De Instrucciones

8.2 Automatic cleaning programs

n
Automatic cleaning program of the coffee circuit
A message on the screen will indicate when a cleaning program needs to be run for the appliance.
Cleaning is required around every 360 preparations.
To run this cleaning program, you will need a container with a capacity of at least 20 oz which can fit
underneath the coffee nozzle, and a KRUPS cleaning tablet (two of which are supplied in the
Welcome Pack).
The automatic cleaning program has three phases: one cleaning cycle and two rinsing cycles. It lasts
around 20 minutes.
Protect your worktop from any splashes during the cleaning and descaling cycles, especially if it is
made of marble, stone or wood.
!
Caution: You are not obliged to carry out the cleaning program immediately when the appliance
requests it, but it must be carried out reasonably soon.
Only use KRUPS cleaning tablets otherwise the guarantee will not cover any material
damage caused by the use of other brands of tablets. Cleaning tablets are available from
your KRUPS After-Sales Service Center.
Below are the main steps in this program. Otherwise, just follow the instructions on the screens
displayed by the machine.
You can access the "Maintenance" menu from the main menu
n
by pressing the "Maintenance" tab.
Press the "Cleaning coffee circuit" button on the touch screen.
n
1
To quit the "Maintenance" menu, press the "Maintenance" tab.
n
Empty the used coffee collector, remove and empty the drip trays, and fill the water tank.
n
2
All manuals and user guides at all-guides.com
ENGLISH
41