Sauder East Canyon 419342 Manual De Instrucciones página 22

Step 18 Step
NOTE: The RIGHT DOOR is not shown in this step.
å
Fasten four BUSHING CONNECTORS (8I) and two SLIDE CATCHES (6J) to the LEFT DOOR (J). Use four BROWN 1-1/2"
å
FLAT HEAD SCREWS (14S).
NOTE: The SLIDE CATCHES will slide into the holes in the TOP (C) and SHELF (E) for extra support for the LEFT DOOR.
å
Before fastening the LOWER DOOR to your unit, be sure the mounting screw is against the stops as shown in the diagram.
å
If it isn't, loosen the mounting screw to slide it against the stops. Then tighten the mounting screw.
Fasten the LOWER DOOR (H) to the BOTTOM (D). Use the
å
screws in the HINGES. You should start each SCREW a
few turns before completely tightening any of them.
See the next step for LOWER DOOR adjustments.
å
Mounting
screw
Hinge
BROWN 1-1/2" FLAT HEAD SCREW
(4 used for the SLIDE CATCHES)
Page 22
8I
Stop
14S
8I
NOTE: Position
the BUSHING
CONNECTORS
exactly as shown.
6J
J
H
6J
419342
C
E
D
www.sauder.com/services