Sauder East Canyon 419342 Manual De Instrucciones página 23

Step 19 Step
Refer to the enlarged diagrams to identify the parts on
å
the HINGES.
The DOORS may need some adjustments. Follow
å
the text below to make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOORS (I and J) from side to side (horizontal), turn
the adjusting screw in or out.
To adjust the DOORS (I and J) up and down (vertical), loosen both
å
vertical adjustment screws. Move the DOORS up or down to the
desired location. Tighten the screws after making adjustments.
To adjust the DOORS (I and J) in or out (depth), loosen the
å
mounting screw one turn and move the DOORS in or out, as
needed. Tighten the mounting screw after making adjustments.
LOWER DOOR ADJUSTMENTS:
å
To adjust the LOWER DOOR (H) from side to side (horizontal),
loosen all horizontal adjustment screws several turns.
Move the LOWER DOOR side to side so the edges are
even. Tighten the horizontal adjustment screws after
making adjustments.
To adjust the LOWER DOOR (H) front to back (depth),
å
loosen the mounting screw several turns. Move the
LOWER DOOR in or out to the desired location. Tighten the
mounting screw after making adjustments.
To adjust the LOWER DOOR (H) up and down (vertical),
å
turn the adjusting screw in or out.
Adjusting screw (vertical)
www.sauder.com/services
Mounting screw (depth)
(horizontal adjustment)
Adjusting screw (horizontal)
J
H
419342
Mounting screw (depth)
(vertical adjustment)
Page 23