Programming - effegibi touch&steam Manual De Uso Y Mantenimiento

TOUCH&STEAM OPERATING AND MAINTENANCE MANUAL EN
Once the ECC - Effegibi Comfort Control function has been activated, the Hammam can be programmed
remotely using the Effegibi Experience My Hammam app.
This app makes it possible to pre-programme the Hammam to switch on and off remotely.
To deactivate the ECC - Effegibi Comfort Control function, just repeat the procedure shown in figures F and G.
When the ECC - Effegibi Comfort Control icon disappears, the function has been deactivated.
N.B.: the ECC - Effegibi Comfort Control function cannot be activated if remote activation is operated by
cable.
If the Hammam is in a public place or if the remote activation has to be operated by cable, contact an
approved service centre or the company direct.
6.2

PROGRAMMING

The Effegibi Experience My Hammam app makes it possible to programme the Hammam to switch on at a
precise time on a particular day of the week.
At 3.00am on the programmed day, the control panel will switch on, the clock icon will light up and the
Hammam button will flash, indicating the programming (see fig. H).
fig. H
Hammam button
flashing
Programming activated icon
The daily programming can be deactivated by switching off the control panel using the "ON/OFF" button.
The Hammam/Turkish bath can also be used when the programming icon is lit up, but if the daily programming
is still required, the control panel must not be switched off at the end of the session, otherwise the programming
will be cancelled.
If one daily program is deactivated, all the settings for that day will be cancelled.
If a new program has been set for the following day, the panel will switch on at 3.00am on that day.
N.B.: programs are controlled by the ECC - Effegibi Comfort Control function, which, if disabled, will cancel
them.
19
The data and features referred to are not binding on EFFEGIBI and the company reserves the right to make any appropriate changes
without having to give prior warning or replace this manual.