Haier HD90-A636-E Manual Del Usuario página 23

EN
Clean the front of the heat exchanger
Approximately all 10 drying cycles the front of the
heat exchanger should be cleaned from fl uff by using
a sponge or vacuum cleaner (fi g.: 47/48). Please use
household gloves. The fl uff can remove easily when
they have been sprayed with water previously.
On this occasion the ventilation slots should be vacu-
umed also (fi g.: 49).
Clean the machine
WARNING!
Unplug the machine during cleaning and mainte-
nance.
Use a soft cloth with soap liquid to clean the ma-
chine case and rubber components (fi g.: 50).
Do not use organic chemicals or corrosive sol-
vents.
Notice
During the drying, moisture may accumulate between windows and seal. It does not af-
fect the function of the dryer.
Clean the drum
After some operation time, fabric care agents or
calcium contained in the water can form an almost
invisible fi lm on the inside of the drum. Use a damp
cloth and some detergent to remove it (fi g.: 51). Do
not use any organic solvent or corrosive agent to
avoid damage to the appliance.
Remove metal parts such as needles, coins, etc.
from the drum which were accidentally dried with
the laundry, because it can cause rusting.
For removing rust stains, use a non-chloride clean-
er. Note the safety instructions of the cleaning
agent manufacturer!
Do not use any hard objects or steel wool for clean-
ing.
Care and cleaning
47 48
49
50
51
23