Fermax AC-MAX2 Manual De Instalación página 42

Cod. 970073 V10_19
Battery charging settings
300 mA current recommended for 12Vdc/7Ah battery
600 mA current recommended for 12Vdc/17Ah battery
LED signalling
In Normal mode the LED signals lack of external power supply. In case of Memory
reset the LED is used for manual addressing.
Single pulse every 4 sec. : Normal mode
Quick pulsing: Service mode
Slow pulsing (0.5s/0.5s): No communication with central
Very slow pulsing (1s/1s): Configuration memory error
Data transmission to central
Data receiving from central
EXP2D/4D terminals
Terminal
BAT+
BAT-
VOUT+
VOUT-
All manuals and user guides at all-guides.com
EXP4D
Fig. 18 EXP4D board
Function
Battery positive pole
Battery negative pole
13.8Vdc/0.2A output power positive pole. Connect to AUX + of the
AC-MAX Central Unit.
13.8Vdc/0.2A output power negative pole. Connect to AUX - of the
42/46