Patented Motion Smarrm Auto-Off - Sunbeam Euro Press 4040-026 Manual Del Usuario

All manuals and user guides at all-guides.com
Patented MOTION SMARPU
When the iron is plugged in, the Power Indicator
will light steadily, indicating that there is power
to the iron.
If you leave the iron:
.
in a vertical position (on its heel rest) without
moving it, the iron will automatically tun off
after 15 minutes. The Power Indicator will
blink or let you know that the iron has
stopped heating.
.
in a horizontal position without moving it (or it
accidentally tips over), the iron will automatically
stop heating after 30 seconds. The Power
Indicator will blink to let you know that the iron
has stopped heating.
Important: The Power Indicator will continue
to blink until the iron is unplugged.
To restart the iron:
Move the iron back and forth and allow it to
reheat for 2 minutes. The indicator will stop
blinking and the iron will start heating again.
WARNING: The patented MOTION SMART" Auto-Ofl
is a safety feature. not a recommended means for
turning your iron off. See "Caring for Your Iron After
Use" on Page ll, for information on turning off your
iron and storing ít safely between use.
Auto-Off