Cleaning The Soleplate; Using The Self-Cleaning Festure - Sunbeam Euro Press 4040-026 Manual Del Usuario

All manuals and user guides at all-guides.com

Cleaning the Soleplate

Clean the soleplate if starch or other residue
accumulate.
To clean the Soleplate:
1.
Allow the iron to cool and then wipe it
with a soft, damp cloth.
WARNING: DO NOT use abrasive cleansers.
scouring pads or vinegar to clean the soleplate,
this will damage the finish.
2. Run the iron over an all-cotton cloth to remove
any residue.
Using the Self-Cleaning Feature
You should use the self-cleaning feature to maintain
the optima1 performance of your iron. The self-
cleaning feature will clean the water reservoir and
steam vents of accumulated minerals, dust and lint.
In general, clean the iron:
.
if the steam vents clog up,
o r
.
once a month if you have hard water,
o r
.
once every two months if you have soft water.
To use the self-cleaning feature:
1. Set the Steam Dial to ZERO and
the Fabric Select Dial to MIN.
TM b-m
r
/