Descargar Imprimir esta página

Tech Specs - Slime 40051 Guia De Inicio Rapido

Publicidad

Idiomas disponibles

Idiomas disponibles

CAUTION: HOT • DO NOT HOLD IN HAND WHILE OPERATING • PLACE INFLATOR ON A
HARD, CLEAN SURFACE.
1. DO NOT run vehicle while inflator is operating. You may need to be in
"accessory" or "on" position. Please make sure emergency brake is set and
car is in park.
2. Always ensure the valve connector is fully seated to depress the core of the
valve stem for proper inflation.
3. DO NOT use inflator continuously for more than 10 minutes. Allow unit
to cool approximately 25 minutes between uses. Do not leave inflator
unattended.
4. ALWAYS use a pressure gauge to check tire pressure. DO NOT overinflate.
5. Soft inflatables (i.e. rafts, balls, etc.) may not have recommended pressure
markings. Be careful not to inflate items beyond their capacity.
6. While operating, never block the inflator input or output.
7. Keep inflator out of reach of children.
8. For use with 12 volt DC power outlets rated 15 amps or higher. Do not use
with older 8 amp cigarette lighter receptacles.
TECH SPECS
IDEAL USES
TIRE INFLATION TIME
CFM
AIR HOSE LENGTH
POWER CORD LENGTH
POWER SOURCE
DIGITAL GAUGE
LIGHT
* (0-35 PSI, Standard Tire: P195/65 R15)
Tires
6 min*
0.75 (21 LPM)
2 ft. (0.6m)
10ft. (3m)
12 volt accessory power outlet
0–99 PSI
LED

Publicidad

loading