Disposal Of The Device (Environment) - Topcom 2100 Manual De Usuario

The parent unit will emit a high beep tone for 30 seconds which helps you to find it very
easiliy.
Press the on/off button briefly to stop the beep.
7 Registration
When the baby unit night lights are flashing and/or no communication can be established
between the baby- and parent unit (the green link LED on the parent unit will flash), the parent
unit needs to be registered to the baby unit:
• When baby unit is in power off state, press and hold the On/Off button (14) on the baby
unit, while connecting the power adaptor.
• The baby unit will power on and enter registration mode.
• Release the On/Off button. Under baby unit registration mode, the night light will flash
for 60 seconds.
• During registration mode, press and hold the On/Off button on the parent unit while
inserting charged batteries.
• The parent unit will power on and 3 LED's (7) (1) (3) will flash.
• If the registration is success, the baby unit night light will stop flashing and exit
registration mode.
• The 3 LED's (7) (1) (3) on the parent unit will go out and exit registration mode with
confirmation tone (1 long beep).
• If the registration is unsuccessful or the registration mode time is elapsed, the baby unit
night light will stop flashing and exit registration mode.
• The 3 LED's (7) (1) (3) on the parent unit indication will go out and exit registration mode
with an error tone (3 short beeps).
• Retry the procedure.
To verify the linkage between parent unit and baby unit:
• Pressing the paging button on the baby unit for 2 seconds.
• The parent unit will emit a high beep tone for 30 seconds.
• Press any button on the parent unit briefly to stop the beep.
8

Disposal of the device (environment)

At the end of the product lifecycle, you should not throw this product into the normal
household garbage but bring the product to a collection point for the recycling of
electrical and electronic equipments. The symbol on the product, user guide and/or
box indicate this.
Some of the product materials can be re-used if you bring them to a recycling point. By re-
using some parts or raw materials from used products you make an important contribution to
the protection of the environment.
Please contact your local authorities in case you need more information on the collection
points in your area.
All manuals and user guides at all-guides.com
Topcom Babytalker 2100
9