Sunny Health & Fitness SF-E3890 Instrucciones De Montaje página 15

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 4:
Attach 2 Pedal Support Tubes
(No. 5L/R) to 2 Cranks (No. 22L/R)
with 2 Bolts (No. 31L/R), 2 Wave
Washers (No. 32), then put on 2
Spring Washers (No. 34) and 2
Nylon Nuts (No. 35L/R) to the end
of 2 Bolts (No. 31L/R) using Allen
Wrench (No. 92) and Spanner (No.
95).
Note:
Please do not fully tighten at this
time.
The Bolts (No. 31L/R) is label L or
R. Make sure to turn the Right Bolt
(No. 31R) clockwise, and Left Bolt
(No. 31L) counter-clockwise.
The Left Nylon Nut (No. 35L) is
black on the inside and Right Nylon
Nut (No. 35R) is white on the
inside. Make sure to turn Right
Nylon
counter-clockwise and Left Nylon
Nut (No. 35L) clockwise.
Attach 2 Swing Bars (No. 6L/R) to
2 Pedal Support Tubes (No. 5L/R)
with 2 Screws (No. 39), 2 Flat
Washers (No. 19) and 2 Nylon
Nuts (No. 14) using Allen Wrench
(No. 94) and Spanner (No. 93).
Fasten 2 Hex Screws (No. 24) for
STEP 3 tightly first, then fasten 2
Bolts (No. 31L/R), 2 Nylon Nuts
(No. 35L/R) tightly. Then cover with
the 2 Caps (No. 23) and 2 Caps
(No. 99).
Note: Ensure that all bolts and
washers are in place and partially
threaded
tightening any of them.
14
Nut (No.
in before completely
35R)