Sunny Health & Fitness SF-E3890 Instrucciones De Montaje página 22

Calories 0~9995
Watt 50~250
Age
Pulse 60~220
PROGRAM OPERATION:
Manual (P1)
Program profile
SETTING PARAMETERS FOR MANUAL PROGRAM
1. Select Manual Program (P1) using the UP or DOWN button, then press ENTER.
2. TIME will flash so the value can be adjusted using the UP or DOWN button.
3. Press the ENTER button to save the value and move to the next parameter to be adjusted.
Note: If you set up the target time for workout, then the next parameter of Distance
cannot be adjusted.
4. Continue through all desired parameters and press the START/STOP button to begin the
workout.
Note: Once the workout parameter counts down to zero, it will beep and stop the
workout automatically. Press the START button to continue the workout to reach the
unfinished workout parameter.
Pre-set programs (P2~P13)
Program profile
0
100
10~99 30
90
1..When display is set as 0,
Calories will count up.
±5
2. When Calories is set as 5~9995,
it will count down to 0.
User can set watt value only in
±5
the Watt Control Program.
Target HR will be based on Age.
When Heart Rate exceeds Target
±1
HR, the Heart Rate number will
flash.
Setting Parameters for Target
±1
heart rate.
21