Control Panel Buttons
Print demo page and configuration sheet
Demo
Press and hold Demo for about 2 seconds until the control panel lights blink slowly to
print a demo page. The printer must be in the ready mode.
Press and hold Demo for about 6 seconds until the control panel lights blink rapidly to
print a configuration sheet. The printer must be in the ready mode. For further infor-
mation, see Reference Manual, page 7.6.
Start manual feeding
When you select Manual Feed for Paper Source from your software application, you
should press Demo each time you feed a sheet of paper manually. For further infor-
mation, see Reference Manual, page 4.10.
Cleaning the inside of the printer
Press and hold Demo for about 10 seconds until the control panel lights remain illu-
minated to automatically clean the printer inside. After cleaning the printer, one clean-
ing sheet prints. For further information, see Reference Manual, page 7.6.
20
All manuals and user guides at all-guides.com
Quick Start-Up