9. Press the SET button
enter the current setup, then press + or - to adjust the current value
to what you need if it is possible.
10. Press the START/STOP button
The Working Indicator light
during the charging process. When the charging finishes, the
Working Indicator light
TIP:* Press the START/STOP button to stop/start charging if needed.
* Press and hold the SET
if necessary.
11. Press the Power Button
Power Indicator light
display will turn off. To store or put away, unplug the power plug
and keep the charger in a well-ventilated and dry place.
to confirm the voltage value and
will turn solid green
will be OFF.
button for 1.5 seconds to change the charging mode
to turn off the charger. The
will be OFF in 5 seconds, and the
to begin charging.