GYS GYSPRESS 10T PP Manual Del Usuario página 32

Vehicle Type
Repair Order
Registration
Release date
Procedure
Comments
To enter this data, select a report and then enter the information in the report header.
Printing a report
To archive a report, select a report and then click on the archive button
the button .
SETTING UP AN ARM
Choose an arm and prepare the locking pin (1). Place the arm carefully on the riveting machine's nose, taking care to
align the marks (2).
The riveter support is fitted with a locator (3) which prevents the HR310 arms from being placed in a position which
would cause the assembly to tilt.
When the arm is placed on the riveter, insert the locking pin into the hole.
The locking pin must be clean and free of any damage. Do not use a defective pin.
1
32
WORKSTATION GYSPRESS 10T PP CONTROL
1
. A preview of the edit will be displayed. Click
2
2
3

Désignation:
montage bras
Produit: -
Nom du fichier CAO:
Ce document est la propriété de la société GYS et ne peut en aucun cas être transmis à quiconque sans son accord.
EN
Etabli par: Arnaud FRISON
Date: 22/10/2021
Assemblage
21_01466
Statut:
-
Indice: Feuille:
- 1/1