GYS GYSPRESS 10T PP Manual Del Usuario página 37

WORKSTATION GYSPRESS 10T PP CONTROL
The F2 die is provided with an evacuation orifice for
adhesive residues. After each riveting procedure, remove
any glue residue from all tools.
RIVET EXTRACTION
When making repairs to body panels, old or defective rivets must be removed from the
joined panels.
To avoid having to remove these rivets by drilling, the extraction tip and its die must be
used. They make it possible to extract the rivets while preserving the sheets.
THE OUTCOME OF USING FLOW-FORM RIVETS
EN
37