Simpson MSH3224 Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING: To reduce the risk of injury, read the pressure washer instruction manual and
the engine instruction manual before operating pressure washer.
Install the Handle
A
Slide the handle
assembly onto the
frame. Align holes in the top
handle with the mounting
holes in the handle
assembly. Secure with
saddle bolts and knobs.
DANGER:
contains carbon monoxide, an odorless and deadly gas.
allow the high-pressure spray to come in contact with unprotected skin, eyes or with
any pets or animals. Serious injury will occur.
Connect Garden
1
Hose to Pump
Thread the garden
hose to the pump inlet.
See Label#1 on the pump.
QUICK SETUP GUIDE
Add/Check Oil
B
The engine is
shipped without
oil. Before starting engine,
add the oil provided.
Check oil level prior to
each use. Refer to Engine
Owner's Manual for
complete procedure.
QUICK START GUIDE
Connect High
2
Pressure Hose to
Pump
Thread the high pressure
hose to the pump outlet.
See Label #2 on the pump.
8- ENG
Add Gasoline
C
In a well ventilated
outdoor area
add fresh, high quality,
unleaded gasoline with a
pump octane rating of 86
or higher. Do not overfill.
Wipe up spilled fuel before
starting the engine. Refer
to Engine Owners Manual
for complete procedure.
Connect High
3
Pressure Hose to
Spray Gun
Thread the other end of
the high pressure hose
to the spray gun.

Publicidad

Tabla de contenido
loading

Tabla de contenido