Positioning Harness Straps - Graco PD117207B Manual Del Propietário

5.1 Positioning Harness Straps

FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS
FOR YOUR CHILD INCREASES THE RISK OF SERIOUS
INJURY OR DEATH IN THE EVENT OF A SHARP TURN,
SUDDEN STOP OR CRASH. The harness straps must be
properly adjusted to fit your child according to the following
instructions.
1. Remove infant restraint from base and
rotate handle down to sitting position.
See „4.1 Adjusting Handle‰ and „4.2
Removing and Attaching Seat‰ , page. 16.
2. Place child in infant restraint as shown –.
3. Determine which pair of harness slots
are even with or just below your
childÊs shoulders —.
4. If the harness straps must be
adjusted: remove child from infant
restraint and move harness straps
to the proper harness slots by doing the
following:
even with or just below
20
Use harness slots
childÊs shoulders
–
—