Know Your Compound Miter Saw; Blade Wrench Storage - Delta Shopmaster S26-272L Manual De Instrucciones

A. Motor
B. Fence
C. Throat Plate
D. Miter Lock Knob
E. Support Extensions
F. Miter Scale with Positive Stops
G. Work Clamp
H. Base With Carry Handles
I. Mounting Holes
J. On-Board Wrench
K. Work Table
L. Bevel Lock Knob
M. Dust Bag
N. Upper and Lower Blade Guards
O. Blade (not visible)
P. Saw Head Handle
Q. Spindle lock (not visible)
R. Slide Lock Knob
S. Electric Brake (not shown)
T. Laser
U. Power Switch Locks (not visible)
V. Power Safety Toggle (not visible)

KNOW YOUR COMPOUND MITER SAW

Refer to Figure 1.
Using this tool safely requires that you understand the
information provided in this operator's manual, as well as
the project you are attempting. Before using this product,
familiarize yourself with all operating features and safety
rules.
A. 15-AMP MOTOR: This tool features a powerful
15-amp motor with all ball bearings and externally
accessible brushes for ease of servicing.
B. ADJUSTABLE FENCE: The miter fence supports
the workpiece when making all cuts. The extension
length is adjustable.
C. THROAT PLATE: The throat plate supports the
workpiece and provides a safe working surface.
D. MITER LOCK: The miter lock knob securely locks the
saw at desired miter angles.
E. SUPPORT EXTENSIONS: Use these to help support
large pieces when necessary.
F. MITER SCALE WITH POSITIVE STOPS: Positive
stops have been provided at 0°, 15°, 22.5°, 31.6°,
and 45°. The blade stops have been provided on
both the left and right side of the miter table.
G. WORK CLAMP: The work clamp helps to position
FEATURES
R
J
N
T
Q
G O
K
E
C
D
F
and secure the workpiece to the fence, ensuring
safer operation and more accurate cuts.
H. BASE WITH CARRY HANDLES: Supports the tool
and features mounting holes. Use the carry handles
which are designed into the base for safe and easy
transportation of the saw.
I. MOUNTING HOLES: Enables you to securely mount
the tool to a stable surface.
J. BLADE WRENCH STORAGE: The included blade
wrench features a Phillips screwdriver at one
end and a hex key at the other. Use the hex key
when installing or removing blade and the Phillips
screwdriver when removing or loosening screws.
When not in use, the wrench can be stored in the
base of the saw.
K. WORK TABLE: Sturdy, large die-cast aluminum work
table provides a level and sturdy work surface.
L. BEVEL LOCK: the bevel lock knob secures the
saw at the desired angle for bevel cuts. There are 2
positive stop screws underneath the bevel lock knob
for making fine adjustments at 0° and 45°.
M. DUST COLLECTION BAG: The included dust bag
attaches and detached quickly with the integrated
clamp for easy cleaning.
7
P U V A
H
FIGURE 1
M
L
B
I
x4
E