Safety Notes; Intended Use; General Power Tool Safety Warnings - Rothenberger ROMAX 3000 Instrucciones De Uso

1

Safety Notes

1.1

Intended use

ROMAX 3000:
The ROMAX 3000 is designed exclusively for the use of pressing jaws manufactured by
ROTHENBERGER or that have been declared suitable by ROTHENBERGER.
The device and the press jaws are designed exclusively for crimp fittings, for which the corre-
sponding pressing jaws have been designed. Any other or additional use shall be deemed im-
proper.
ROTHENBERGER cannot accept any liability for the resultant consequences and damage, nor
for the use of pressing jaws from other manufacturers, neither for damage caused by these
pressing jaws.
Proper usage also includes compliance with the operating manual, compliance with the inspec-
tion and servicing conditions and adherence to all the relevant safety regulations.
The ROMAX 3000 is a handheld electric machine and must not be used for stationary applica-
tions.
This device may only be used correctly as described.
Battery / Charger:
The quick charger charges ROMAX batteries 18 V art. no: 15810.
Do not use this product in any other way as stated for normal use.
1.2

General Power Tool Safety Warnings

WARNING!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious in-
jury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your electrically-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with (grounded) power tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with grounded surfaces such as pipes, radiators, ranges and re-
frigerators. There is an increased risk of electric shock if your body is grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will in-
crease the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors only, use an extension cords suitable for out-
door use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current de-
vice (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
12 ENGLISH